Views: 75 Author: Site Editor Publish Time: 2019-07-19 Origin: Site
WPC uses polyethylene, polypropylene and polyvinyl chloride instead of common resin adhesives, and mixes with more than 50% wood flour, rice husk, straw and other waste plant fibers to form new wood materials. Then the sheet or profile is produced by extrusion, moulding, injection moulding and other plastic processing technology. It is mainly used in building materials, furniture, logistics packaging and other industries.
1. Good machinability.
Wood-plastic composites contain plastics and fibers. Therefore, they have similar processing properties to wood. They can be sawed, nailed and planed. It can be accomplished by woodworking tools. The nail force is obviously superior to other synthetic materials. Mechanical properties are superior to wood. Nailing force is generally three times that of wood and five times that of particleboard.
2. Good strength performance.
Wood-plastic composites contain plastics, so they have good elastic modulus. In addition, due to the inclusion of fibers and the full mixing of plastics, it has the same physical and mechanical properties as hardwood, such as compression and bending resistance. Its durability is obviously superior to that of ordinary wood. Surface hardness is high, usually 2 to 5 times that of wood.
3. It has the characteristics of water resistance, corrosion resistance and long service life.
Compared with wood, wood-plastic materials and products have the characteristics of acid and alkali resistance, water resistance, corrosion resistance, non-breeding bacteria, not easy to moth, not easy to grow fungi and so on. Moreover, it has a long service life of up to 50 years.
WPC floor is composed of PVC wear-resistant layer, printed layer, semi-rigid PVC intermediate layer, WPC core layer and backing layer.
From the scope of people's activities and the amount of exercise, the reinforced wood board is not suitable for the pavement of public places. The excessive amount of exercise and the excessive bearing capacity are mostly unsustainable for the reinforced floor. It is easy to crack. WPC composite flooring has super locking force, which is very suitable for paving in public environment. You can jump anyway without trepidation.Besides, WPC floor has the characteristics of SPC flooring, such as environmental protection.
WPC vinyl material flooring can be widely used in the bedroom, hall, kitchen and bathroom floor paving. It can also be used in office buildings, libraries, museums, shopping malls, restaurants, factories, schools, hospitals and other ground paving. It can be laid on the ground of swimming pool, sauna bathroom and basement, which are easy to produce warm vapor and fog.
1. Preparing tools for product laying: wooden ruler, triangular ruler, saw blade, artistic knife, leather hammer, 2-meter ruler, triangular ruler, etc.
2. Place the selected striped locking floor in the open space. Then according to the middle straight line or side straight line, lay with 90 degree right angle line. First, fix the first lock floor A side face to the lock surface.
3. The front side of A is connected with the lock of the front side of B. The front edge of A is flattened in a straight line and flat on the ground. Then the front edge of B is inserted into the A lock at an angle of 35 degrees. After using the prepared wooden straight size bracket, the floor of B lock is flattened by tapping the seam tightly, and the operation is completed.
4. Lock floor doors and edge seams are similar to wood floor laying. Routine pressing strips are used for doors and special sticking strips are used for upper wall edges.
5. After the completion of the laying of the locking floor, it should be connected by buckles, front and rear buckles, both horizontal and vertical buckles. The floor of each room is an integral whole, and there won't be any cracks in the long run.
WPC flooring is soft and elastic. It has good elastic recovery under the impact of heavy objects. Its comfortable feel of feet is called "floor soft gold". Now more and more people like it. There are more and more flooring companies in the market, we must choose carefully.
Selecting the right floor would depend on several factors; for instance, if the room is exposed to high moisture levels, excessive daylight and temperature fluctuations, you should consider these conditions before choosing a flooring type.However, regardless of your choice, there will be a click (or
1. The bottom floor is damp1) Performance: The drums of the plastic floor are concentrated in several areas, and the ground forms a hollow drum.2) Reason: When the bottom floor is in a wet state, laying a waterproof plastic floor layer on it will cause the moisture in the wet bottom layer to be unab
1. When receiving the stone plastic floor, check whether the color, quantity is correct, and damaged according to the order. Especially whether the floors are from the same batch, and whether they meet the requirements of the order.2. There must be no cracking, hollowing, etc. on the ground, and the
1. Super environmental protection: the main raw material is natural stone powder, which does not contain any ingredients harmful to the human body and the environment. It has passed the Chinese national standard national standard test, does not contain any radioactive elements, and has also passed t
1. Sweep FrequentlySweep at least once a week to remove any dust and loose dirt. If you have time, it is a good idea to briefly sweep the floor across the room each time after use.2. Mop OccasionallyTo better keep your flooring clean and stain-free, use damp cloth or mop and clean thoroughly with mi
durabilityAlthough WPC floors are thicker than SPC floors, SPC is actually more durable. SPC is denser, which means it is more resistant to damage from heavy objects.priceIn terms of price, SPC is the more affordable of the two. If price is an important factor for you, then SPC is the way to go.form
All tiles and planks should be checked before and during installation for clearly visible faults; this will reduce problems when assembling and identify any color differences. The inspection should be performed in daylight, or under good artificial lighting, in the room in which the products are to
1. Line up the flooring along the wall, taking planks from several boxes to get the look and pattern you desire. This is especially important if your flooring has a variety of texture and color variation.2. Begin installing the first plank in the corner of the room. Lay the plank in the corner, groo