The development of PVC FlooringIn the past, solid wood flooring was very popular due to its realistic wood texture and comfortable foot feeling. However, it was only used in many rich residential area due to its expensive cost. Then engineered wood flooring occurred and lasted for some years.
What is UV coating?SPC flooring started to go into public sight in 2016 and keeps developing till now. Various kinds of micro-innovation make it gain the favor of many people. It is famous and has wide spread use due to its excellent durability and stability.
In current society, more and more people prefer to keep a pet as their hobby and relaxing way instead of parenting a kid due to too much stress. Pets are similar to kids, thus how to select construction materials to decorate home become a urgent requirement for those pet lovers.
This article tells about some knowledge about cleaning vinyl floors.
Both laminate and tile have come a long ways over the past few decades. Comparing those 2 flooring, MSPC Flooring is more newer. but, MSPC Flooring look impressive and make great additions to any home. So which one floor is the best for home decoration? Let’s brief learning.
PTW6013-1
Protex
SKU: | |
---|---|
Availability: | |
Description | WPC VINYL FLOORING |
Construction | WPC core(Wood Powder+Virgin PVC composite,not contain plasticizer) |
Finish | BP/Handscrap/Marble/ Deep embossed/EIR |
Wear Layer | 0.3mm/0.5mm/0.7mm wear-layer for residential,light commercial&heavy commercial |
Gloss Level | 5%-7% |
Profile | Angle installation,Drop and Lock |
Edge | Square edge,Micro-bevel, V Groove with painted |
Installation | Valinge,Unilin,I4F click system,Glue free |
Available plank size | 12''x12'',12''x24'',6''x36'', 7''x48'', 9''x48'', 9''x60'' |
Usage | Kitchen room, Bathroom, Homes, Schools,Hospital, Malls, Pubs and any indoor areas |
Warranty | 10 years for commercial and 20 years for residential |
Description | WPC VINYL FLOORING |
Construction | WPC core(Wood Powder+Virgin PVC composite,not contain plasticizer) |
Finish | BP/Handscrap/Marble/ Deep embossed/EIR |
Wear Layer | 0.3mm/0.5mm/0.7mm wear-layer for residential,light commercial&heavy commercial |
Gloss Level | 5%-7% |
Profile | Angle installation,Drop and Lock |
Edge | Square edge,Micro-bevel, V Groove with painted |
Installation | Valinge,Unilin,I4F click system,Glue free |
Available plank size | 12''x12'',12''x24'',6''x36'', 7''x48'', 9''x48'', 9''x60'' |
Usage | Kitchen room, Bathroom, Homes, Schools,Hospital, Malls, Pubs and any indoor areas |
Warranty | 10 years for commercial and 20 years for residential |
wpc flooring | wpc flooring | wpc flooring |
wpc flooring | wpc flooring | wpc flooring |
No | Characteristic | Technology Target | Remark | |||||
1 | Appearance | No chipping, cracking, visual texture ,delamination, bubbles, shallow embossing, scratches, dirt, poor cut, etc | ENEN649 | |||||
2 | Size mm(23℃) | Length | ± 0.20mm | EN427 | ||||
Wide | ± 0.10mm | EN427 | ||||||
Thickness | +0.13mm, -0.10mm | EN428 | ||||||
Thickness Range | ≤0.15 mm | EN428 | ||||||
wearlay Thickness | ± 0.02 mm | EN429 | ||||||
3 | Squareness mm | ≤ 0.15 | EN427 | |||||
4 | Crook mm | ≤ 0.15 | EN427 | |||||
5 | Microbevel Cut Angle | 8-15 degrees | ||||||
Microbevel Cut Depth | 0.60 – 1.5 mm | |||||||
6 | Dimensional stability after exposure to heat | ≤ 0.12% | EN434 | |||||
7 | Curling after exposure to heat | WPC:≤0.2(70℃/6Hr) SPC:≤0.2(80℃/6Hr) | EN434 | |||||
8 | Gloss level | nominal value ± 1.5 | Lightmeter | |||||
9 | Taber Abrasion - Minimum | 0.5mm wear lay | ≥5000 cycles Average | EN660 | ||||
10 | Uv | 8~12g/m2 | ||||||
11 | ≥9N | |||||||
SCRATCH PERFORMANCE UV | SCLEROMETER | |||||||
12 | Anti-stain performance | Iodine | 3 | Modified ASTM 92 | ||||
Oil Brown | 0 | |||||||
Mustard | 0 | |||||||
Shope Polish | 2 | |||||||
Blue Sharpie | 1 | |||||||
13 | Determination of flexibility | no crack | EN435 | |||||
14 | Peel Resistance | Length | ≥62.5N/5cm | EN431(62.5N/5cm,100mm/s) | ||||
width | ≥62.5N/5cm | |||||||
15 | Residual indentation (average) mm | ≤0.15 | EN433 | |||||
16 | Color fastness: | ≥7 | ISO105-B2:2002 | |||||
17 | Locking Strength | fsmax ≥2 .5N/mm | ISO24344 |
No | Characteristic | Technology Target | Remark | |||||
1 | Appearance | No chipping, cracking, visual texture ,delamination, bubbles, shallow embossing, scratches, dirt, poor cut, etc | ENEN649 | |||||
2 | Size mm(23℃) | Length | ± 0.20mm | EN427 | ||||
Wide | ± 0.10mm | EN427 | ||||||
Thickness | +0.13mm, -0.10mm | EN428 | ||||||
Thickness Range | ≤0.15 mm | EN428 | ||||||
wearlay Thickness | ± 0.02 mm | EN429 | ||||||
3 | Squareness mm | ≤ 0.15 | EN427 | |||||
4 | Crook mm | ≤ 0.15 | EN427 | |||||
5 | Microbevel Cut Angle | 8-15 degrees | ||||||
Microbevel Cut Depth | 0.60 – 1.5 mm | |||||||
6 | Dimensional stability after exposure to heat | ≤ 0.12% | EN434 | |||||
7 | Curling after exposure to heat | WPC:≤0.2(70℃/6Hr) SPC:≤0.2(80℃/6Hr) | EN434 | |||||
8 | Gloss level | nominal value ± 1.5 | Lightmeter | |||||
9 | Taber Abrasion - Minimum | 0.5mm wear lay | ≥5000 cycles Average | EN660 | ||||
10 | Uv | 8~12g/m2 | ||||||
11 | ≥9N | |||||||
SCRATCH PERFORMANCE UV | SCLEROMETER | |||||||
12 | Anti-stain performance | Iodine | 3 | Modified ASTM 92 | ||||
Oil Brown | 0 | |||||||
Mustard | 0 | |||||||
Shope Polish | 2 | |||||||
Blue Sharpie | 1 | |||||||
13 | Determination of flexibility | no crack | EN435 | |||||
14 | Peel Resistance | Length | ≥62.5N/5cm | EN431(62.5N/5cm,100mm/s) | ||||
width | ≥62.5N/5cm | |||||||
15 | Residual indentation (average) mm | ≤0.15 | EN433 | |||||
16 | Color fastness: | ≥7 | ISO105-B2:2002 | |||||
17 | Locking Strength | fsmax ≥2 .5N/mm | ISO24344 |
content is empty!