When it comes to selecting flooring for areas prone to moisture, such as bathrooms, kitchens, and basements, finding a solution that offers complete waterproofing is essential. But with numerous options available on the market, which flooring materials can truly boast being 100% waterproof?
In today's era of sustainable construction, the quest foreco-friendly building materials is at the forefront of design considerations. Among the options, Magnesium Oxide (MGO) board has garnered attention for its purported environmental advantages.
Magnesium oxide (MgO) flooring has gained recognition for its exceptional durability, eco-friendly nature, and diverse design options. The process of crafting MgO flooring involves several crucial stages that contribute to its strength, versatility, and sustainability.
The figure of MgO Flooring appeared in the market a few years ago, but we know little about it, and due to the SPC, LVT and other classical floors hit the hot, we may not be very impressive to this new technology floor, but with the technology of the new generation, the current MgO Flooring technology maturity has far more than a few years ago.
In today's interior design landscape, choosing the right flooring material is crucial for creating aesthetically pleasing and functional living spaces.
PTW6030-6
Protex
SKU: | |
---|---|
Availability: | |
Description | WPC VINYL FLOORING |
Construction | WPC core(Wood Powder+Virgin PVC composite,not contain plasticizer) |
Finish | BP/Handscrap/Marble/ Deep embossed/EIR |
Wear Layer | 0.3mm/0.5mm/0.7mm wear-layer for residential,light commercial&heavy commercial |
Gloss Level | 5%-7% |
Profile | Angle installation,Drop and Lock |
Edge | Square edge,Micro-bevel, V Groove with painted |
Installation | Valinge,Unilin,I4F click system,Glue free |
Available plank size | 12''x12'',12''x24'',6''x36'', 7''x48'', 9''x48'', 9''x60'' |
Usage | Kitchen room, Bathroom, Homes, Schools,Hospital, Malls, Pubs and any indoor areas |
Warranty | 10 years for commercial and 20 years for residential |
Description | WPC VINYL FLOORING |
Construction | WPC core(Wood Powder+Virgin PVC composite,not contain plasticizer) |
Finish | BP/Handscrap/Marble/ Deep embossed/EIR |
Wear Layer | 0.3mm/0.5mm/0.7mm wear-layer for residential,light commercial&heavy commercial |
Gloss Level | 5%-7% |
Profile | Angle installation,Drop and Lock |
Edge | Square edge,Micro-bevel, V Groove with painted |
Installation | Valinge,Unilin,I4F click system,Glue free |
Available plank size | 12''x12'',12''x24'',6''x36'', 7''x48'', 9''x48'', 9''x60'' |
Usage | Kitchen room, Bathroom, Homes, Schools,Hospital, Malls, Pubs and any indoor areas |
Warranty | 10 years for commercial and 20 years for residential |
wpc flooring | wpc flooring | wpc flooring |
wpc flooring | wpc flooring | wpc flooring |
No | Characteristic | Technology Target | Remark | |||||
1 | Appearance | No chipping, cracking, visual texture ,delamination, bubbles, shallow embossing, scratches, dirt, poor cut, etc | ENEN649 | |||||
2 | Size mm(23℃) | Length | ± 0.20mm | EN427 | ||||
Wide | ± 0.10mm | EN427 | ||||||
Thickness | +0.13mm, -0.10mm | EN428 | ||||||
Thickness Range | ≤0.15 mm | EN428 | ||||||
wearlay Thickness | ± 0.02 mm | EN429 | ||||||
3 | Squareness mm | ≤ 0.15 | EN427 | |||||
4 | Crook mm | ≤ 0.15 | EN427 | |||||
5 | Microbevel Cut Angle | 8-15 degrees | ||||||
Microbevel Cut Depth | 0.60 – 1.5 mm | |||||||
6 | Dimensional stability after exposure to heat | ≤ 0.12% | EN434 | |||||
7 | Curling after exposure to heat | WPC:≤0.2(70℃/6Hr) SPC:≤0.2(80℃/6Hr) | EN434 | |||||
8 | Gloss level | nominal value ± 1.5 | Lightmeter | |||||
9 | Taber Abrasion - Minimum | 0.5mm wear lay | ≥5000 cycles Average | EN660 | ||||
10 | Uv | 8~12g/m2 | ||||||
11 | ≥9N | |||||||
SCRATCH PERFORMANCE UV | SCLEROMETER | |||||||
12 | Anti-stain performance | Iodine | 3 | Modified ASTM 92 | ||||
Oil Brown | 0 | |||||||
Mustard | 0 | |||||||
Shope Polish | 2 | |||||||
Blue Sharpie | 1 | |||||||
13 | Determination of flexibility | no crack | EN435 | |||||
14 | Peel Resistance | Length | ≥62.5N/5cm | EN431(62.5N/5cm,100mm/s) | ||||
width | ≥62.5N/5cm | |||||||
15 | Residual indentation (average) mm | ≤0.15 | EN433 | |||||
16 | Color fastness: | ≥7 | ISO105-B2:2002 | |||||
17 | Locking Strength | fsmax ≥2 .5N/mm | ISO24344 |
No | Characteristic | Technology Target | Remark | |||||
1 | Appearance | No chipping, cracking, visual texture ,delamination, bubbles, shallow embossing, scratches, dirt, poor cut, etc | ENEN649 | |||||
2 | Size mm(23℃) | Length | ± 0.20mm | EN427 | ||||
Wide | ± 0.10mm | EN427 | ||||||
Thickness | +0.13mm, -0.10mm | EN428 | ||||||
Thickness Range | ≤0.15 mm | EN428 | ||||||
wearlay Thickness | ± 0.02 mm | EN429 | ||||||
3 | Squareness mm | ≤ 0.15 | EN427 | |||||
4 | Crook mm | ≤ 0.15 | EN427 | |||||
5 | Microbevel Cut Angle | 8-15 degrees | ||||||
Microbevel Cut Depth | 0.60 – 1.5 mm | |||||||
6 | Dimensional stability after exposure to heat | ≤ 0.12% | EN434 | |||||
7 | Curling after exposure to heat | WPC:≤0.2(70℃/6Hr) SPC:≤0.2(80℃/6Hr) | EN434 | |||||
8 | Gloss level | nominal value ± 1.5 | Lightmeter | |||||
9 | Taber Abrasion - Minimum | 0.5mm wear lay | ≥5000 cycles Average | EN660 | ||||
10 | Uv | 8~12g/m2 | ||||||
11 | ≥9N | |||||||
SCRATCH PERFORMANCE UV | SCLEROMETER | |||||||
12 | Anti-stain performance | Iodine | 3 | Modified ASTM 92 | ||||
Oil Brown | 0 | |||||||
Mustard | 0 | |||||||
Shope Polish | 2 | |||||||
Blue Sharpie | 1 | |||||||
13 | Determination of flexibility | no crack | EN435 | |||||
14 | Peel Resistance | Length | ≥62.5N/5cm | EN431(62.5N/5cm,100mm/s) | ||||
width | ≥62.5N/5cm | |||||||
15 | Residual indentation (average) mm | ≤0.15 | EN433 | |||||
16 | Color fastness: | ≥7 | ISO105-B2:2002 | |||||
17 | Locking Strength | fsmax ≥2 .5N/mm | ISO24344 |
content is empty!