SPC floor Pit Avoidance Guide

SPC floor "Pit Avoidance Guide": teach you how to identify the quality of SPC floor

High card floor

Focus on environmental protection and good flooring, and won the top ten brands of flooring for 10 consecutive years.

SPC floor is a new type of floor decoration material that is widely used. It is widely welcomed in Europe, America and Asia-Pacific markets. In recent years, SPC flooring has been favored by real estate developers and other customers in domestic hotels, shops, kindergartens and other public and commercial places. accept!

However, with the rapid popularization of SPC flooring in China, the quality of SPC flooring in the market is uneven and mixed. Faced with many flooring brands, consumers can be dazzled. How to choose high-quality flooring among many brands is a difficult problem for consumers. Today, let's take a look at the pit avoidance guide for SPC floors with the editor, so that you can choose high-quality spc floors.

Steps to identify spc stone plastic floor:

1. Look at the color

It mainly depends on the color of the "spc substrate". The color of the pure material is beige, the mixed material is gray, cyan and white, and the recycled material is gray-black and black. This cost can be divided into many levels.

2. Touch the feel

The spc substrate feels delicate and moisturizing. The reclaimed material and the mixed material have a dry hand and no water-moisture feeling. After the two pieces are spliced, check whether the flatness and fit are good.

3. Smell

There are some very poor ones that will have a little odor. Most of them contain recycled materials and mixtures, and they can still be odorless.

4. Light (light transmittance)

The mobile phone flashlight is placed against the floor, with good light transmittance, and the admixtures and recycled materials are opaque. or poor light transmission.

5. Thickness

If possible, it is best to use a caliper or a micrometer to measure the thickness of the floor. The actual thickness is about 0.2mm more than the marked thickness, which is the normal range. For example, if the regular manufacturer has marked a thickness of 4.0 according to the production standard, the measurement with a caliper or a micrometer should be around 4.2. , Because the thickness of the wear-resistant layer and the uv layer is added, if the actual measurement is 4.0, you actually buy a thickness of 3.7--3.8, which is commonly known as cutting corners. We can imagine how much this manufacturer can do in other links that we can't see.

6. Break the lock

For the female buckle on the edge of the floor (that is, the part of the lock that leaks out a lot), break the lock with force. If the force is not too high, it will be broken. The strength of pure new material will be much stronger, and it is not easy to break.

7. Tear off the color film

This is not easy to operate. It is necessary to collect a few samples from several merchants, destroy and comb the corners, tear apart the color filter layer and the spc substrate, and check the bonding strength between the color filter layer and the substrate. This decision Whether it is easy to peel in the next few years of use. The bonding strength of pure new material is the largest, followed by others. It doesn't matter if you can't operate it. Basically, it is not bad to judge the high-quality merchant's product through the above steps.